Aquapac 344 - PDA Case (without expansion packs)
- SKU: 100574
- , EAN: 0707398083447
- , UPC: 707398083447
- , Mfr: AQUA 344/348
- , Brand: Aquapac
Aquapac 344 - PDA Case Features
Sealed with a Twist -The Aquaclip is the key to all Aquapacs. An amazing little device which seals the case with a simple twist of a lever. It has a V-groove in one half and a raised V on the other. When the levers on the male half are turned they run up a ramp on the female half – squeezing the two together. The pressure’s not sufficient to cut the soft plastic case material, but just enough to make a totally hermetic seal. The two halves are attached to the case by a pair of ‘flexible clips’ in such a way that the whole case stays in one piece, even when open.
Award Winning - The Aquaclip was awarded Millennium Product Status by the British Design Council. A government initiative to recognize "one of the most innovative products created in Britain for the new Millennium".
Aquapac has also been awarded with the Queen's Award for Enterprise: Innovation 2007 as recognition for achievement on continuous innovation and development.
Tested to Destruction - The Aquaclip is made entirely of light injection-moulded plastic. So it can’t rust. In tests at Bath University the lever mechanism was tested for 10,000 cycles of opening and closing, with no loss of function. The Aquaclip has been tested to the most demanding standards of waterproofness.
User Friendly - When you open an Aquapac everything stays in one piece. No loose screws. No need to fold the end of the case. Simple.
Fully Patented - The Aquaclip is fully-patented in the USA and most of Europe, and the subject of pending protection all over the world.
Beware of Cheap Imitations!
There are cheap Asian-made cases circulating in some countries – many of them illegal because they infringe our Patent rights. Think carefully before buying. If it doesn’t say Aquapac on the clamp, it's not a genuine Aquapac.
Click here for Aquapac's sizing guide for all of their cases
Award Winning - The Aquaclip was awarded Millennium Product Status by the British Design Council. A government initiative to recognize "one of the most innovative products created in Britain for the new Millennium".
Aquapac has also been awarded with the Queen's Award for Enterprise: Innovation 2007 as recognition for achievement on continuous innovation and development.
Tested to Destruction - The Aquaclip is made entirely of light injection-moulded plastic. So it can’t rust. In tests at Bath University the lever mechanism was tested for 10,000 cycles of opening and closing, with no loss of function. The Aquaclip has been tested to the most demanding standards of waterproofness.
User Friendly - When you open an Aquapac everything stays in one piece. No loose screws. No need to fold the end of the case. Simple.
Fully Patented - The Aquaclip is fully-patented in the USA and most of Europe, and the subject of pending protection all over the world.
Beware of Cheap Imitations!
There are cheap Asian-made cases circulating in some countries – many of them illegal because they infringe our Patent rights. Think carefully before buying. If it doesn’t say Aquapac on the clamp, it's not a genuine Aquapac.
Click here for Aquapac's sizing guide for all of their cases
- Shipping Weight: 0.19lb
User Comments
Support Forums
Technical Details
- You can use a stylus as normal through the clear window of the case
- We've added a LENZFLEX window on the back, which means that if you have a Smartphone or PDA with a camera you'll be able to take photos right through the case
- Designed with an integral stylus holder
- Its guaranteed submersible to 15 feet (5 metres)
- The UV-stabilized TPU material won't be broken down or discoloured by sunlight
- It keeps out dust and sand too
- The airtight seal means your PDA will float safely if dropped in water
- Suitable for PDAs or PDA-style phones without expansion packs
- It comes with an adjustable neckcord so you can hang it round your neck.
- It comes with our 3-year global warranty (see 'Buy with confidence' below).
- Dimensions:Maximum size of equipment to fit in case - Length: 6in/150mm x Circumference: 7.9in/200mm
