D-Link 10/100/1000 Gigabit Desktop PCI Adapter

  • SKU: 110640
  • , UPC: 790069251610
  • , Mfr: DGE-530T
  • , Brand: D-Link
  • $19.99

  •  

  • 100+ In Stock Now
Add To Cart

or

Check out with PayPal
Why Expansys?

D-Link 10/100/1000 Gigabit Desktop PCI Adapter Features

The D-Link DGE-530T is a 10/100/1000Mbps copper Gigabit PCI card for servers and workstations. Current systems running at 10Mbps and 100Mbps can be upgraded to Gigabit Ethernet, eliminating network bottlenecks, and increasing productivity.

Integrate Gigabit now and you can save time, money, and downtime because the DGE-530T will automatically detect and run at higher speeds when it becomes available.

As an inexpensive alternative solution to fiber-optic, the card allows you to instantly upgrade to Gigabit without requiring you to install new, expensive fiber cables. Gigabit Ethernet uses your existing Category-5 cabling while providing you with 10/100/1000Mbps network speed auto-sensing and full/half duplex auto-negotiation.

The DGE-530T supports SNMP for remote troubleshooting and management, ACPI for lower power consumption, and WoL for remote wake. This helps to lower total cost of ownership (TCO). The card also features on-board screening of VLAN Tagged Ethernet frames, allowing you to assign multiple subnets to each server and isolate devices within each VLAN from the rest of the network for better traffic control and security. It also supports 802.1p Priority Tagging to allow you to prioritize traffic.

The card also features embedded flow control and independent FIFO, providing a means to protect against possible data loss during transmission on the network. With the Cable Diagnostic feature, the card will automatically detect whether you have a bad cable, making your troubleshooting task easier.
  • Shipping Weight: 0.44lb

User Comments

Support Forums

Topic Latest Post
All Threads

DOS Driver?

by steelyglint on 05 October 2004 at 12:38

Replies: 2
Views: 2,101

by Mahesh
on Wed Oct 6, 2004 11:00 AM

Technical Details

  • DGE-530T: Single Port 32bit/33mhz 10/100/1000Mbps PCI Adapter; QoS: Support For 802.1p Priority Tagging; VLANs: Support For 802.1q VLANs
  • Cable Diagnostics: Advanced Cable Diagnostics (Windows Utility); Power Management: Wake-On-LAN (WoL) and ACPI 2.0 ; Universal BUS Support: 3.3V and 5.0V
  • PCI Local BUS Master: Supports 2.1/2.2; Network Management: SNMPv1 Support
  • Supported Operating Systems: Windows 98SE/ME/2000/XP, Novell Netware 4.2/5.x/6.x, Red Hat Linux 7.3 & Later (Kernel 2.4.18-3 and later), & (Planned Future Support For Free BSD and Sun Solaris)
  • Interface Options: RJ-45 10BASE-T, 100BASE-TX & 1000BASE-T
  • Network Standards IEEE: 802.3 Ethernet, 802.3u Fast Ethernet, 802.3ab Gigabit Ethernet, 802.1p Priority Tagging, 802.1q VLANs, 802.3x Flow Control
  • Dimensions (L x W): 124mm x 51mm (4.88 x 2.01) Inches
  • Weight: 0.23kg (0.51) Pounds