Translate this page:

Welcome to our forums. Please sign-in or register

CK3100 suddenly stopped working completely

Posted: 01:09 28 Jul 08 #1
  • strglide
  • 2 Posts
  • Join Date: 28 July 2008
One day everything is working fine, the next day it my CK3100 doesn't work at all. When I turn on the ignition it gives about 4 beeps through the speakers and then there is nothing. I do not have a display or connection.  I already checked the fuses and connections . They seem allright. There is power to the blue box but nothing works. Any suggestions?
Posted: 08:29 28 Jul 08 #2
  • Carphone Online
  • 6 Posts
  • Join Date: 28 July 2008
  • Occupation: Installation Services
  • Location: Western Australia

That 4 beep noise you here is a warning signal to say that it is not put together right. Normaly it is the screen, check how it was mounted and make sure that the cable is not pulling to hard on the base of the display and the plug is all the way in. let me know how you go please.

 

Regards,

Carphone

Posted: 02:38 29 Jul 08 #3
  • strglide
  • 2 Posts
  • Join Date: 28 July 2008
That was it. the cable became disconnected from the circuit board in the display box. Thank you!
Posted: 03:47 29 Jul 08 #4
  • Carphone Online
  • 6 Posts
  • Join Date: 28 July 2008
  • Occupation: Installation Services
  • Location: Western Australia

No problems, happy to help.

 

Regards,

Carphone Online

Posted: 20:48 14 Feb 09 #5
ive now encountered exactly the same problem can somebody please explain how i reconnect the white connector plug to the circuit board and where exactly it goes as its driving me mad but doesnt seem obvious where to connect  as the circuit board appears almost flush many thanjks in advance gary
Please suggest any improvements or report problems / abuse to moderator@expansys.com